TRANSFER AND WASHING ACCESSORIES

TRANSFER AND WASHING ACCESSORIES
View as List Grid

Items 31-45 of 70

per page
Set Descending Direction
  1. NOZZLE FOR WASHING TANKS - ROTOR
    NOZZLE FOR WASHING TANKS - ROTOR
    Cod. 63560399
    New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.
    INLET
    PTG 15 mm.
  2. NOZZLE FOR WASHING TANKS - ROTOR
    NOZZLE FOR WASHING TANKS - ROTOR
    Cod. 6356029P
    New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.
    INLET
    thread 3/4inch M.
  3. NOZZLE FOR WASHING TANKS - ROTOR
    NOZZLE FOR WASHING TANKS - ROTOR
    Cod. 63560299
    New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.
    INLET
    PTG 15 mm.
  4. NOZZLE FOR WASHING TANKS - ROTOR
    NOZZLE FOR WASHING TANKS - ROTOR
    Cod. 6356019P
    New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.
    INLET
    thread 3/4inch M.
  5. NOZZLE FOR WASHING TANKS - ROTOR
    NOZZLE FOR WASHING TANKS - ROTOR
    Cod. 63560199
    New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.
    INLET
    PTG 15 mm.
  6. NOZZLE FOR WASHING TANKS
    NOZZLE FOR WASHING TANKS
    Cod. 63408399.UNI
    These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.
    INLET
    thread 3/4inch M.
    FLOW RATE
    28 Lt/Min
    OUTLET
    No
    VERSION
    No
  7. NOZZLE FOR WASHING TANKS
    NOZZLE FOR WASHING TANKS
    Cod. P1000153
    These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.
    INLET
    PTG 13 mm.
    FLOW RATE
    60 Lt/Min
    OUTLET
    No
    VERSION
    No
  8. NOZZLE FOR WASHING TANKS
    NOZZLE FOR WASHING TANKS
    Cod. P1000164
    These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.
    INLET
    PTG 13 mm.
    FLOW RATE
    60 Lt/Min
    OUTLET
    NOZZLE Ø40
    VERSION
    With tap
  9. NOZZLE FOR WASHING TANKS
    NOZZLE FOR WASHING TANKS
    Cod. P1000154
    These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.
    INLET
    PTG 13 mm.
    FLOW RATE
    60 Lt/Min
    OUTLET
    NOZZLE Ø40
    VERSION
    No
  10. NOZZLE FOR WASHING TANKS
    NOZZLE FOR WASHING TANKS
    Cod. P1000163
    These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.
    INLET
    PTG 13 mm.
    FLOW RATE
    60 Lt/Min
    OUTLET
    No
    VERSION
    With tap
  11. NOZZLE FOR WASHING TANKS
    NOZZLE FOR WASHING TANKS
    Cod. 63408399
    These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.
    INLET
    PTG 13 mm.
    FLOW RATE
    28 Lt/Min
    OUTLET
    No
    VERSION
    No
  12. NOZZLE FOR WASHING TANKS
    NOZZLE FOR WASHING TANKS
    Cod. 6355059R
    These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.
    INLET
    PTG 13 mm.
    FLOW RATE
    28 Lt/Min
    OUTLET
    NOZZLE Ø40
    VERSION
    With tap
  13. NOZZLE FOR WASHING TANKS
    NOZZLE FOR WASHING TANKS
    Cod. 6340839R
    These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.
    INLET
    PTG 13 mm.
    FLOW RATE
    28 Lt/Min
    OUTLET
    No
    VERSION
    With tap
  14. NOZZLE FOR WASHING TANKS
    NOZZLE FOR WASHING TANKS
    Cod. 63550599
    These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.
    INLET
    PTG 13 mm.
    FLOW RATE
    28 Lt/Min
    OUTLET
    NOZZLE Ø40
    VERSION
    No
  15. NOZZLE FOR WASHING CONTAINERS
    NOZZLE FOR WASHING CONTAINERS
    Cod. 6M41259V
    This product is used to clean chemical products out of emptied containers before they are disposed of. It consists of a central shaft on which rotates a fluid-activated nozzle that is able to rotate through 360° to spray the inner surfaces of the container. The nozzle has tips at its end which allows it to break the protective film on sealed containers holding chemical products. It is made using anticorrosive material. Versions: with 1/2” BSP male connector and 18x1.5 male connector. The version with valve is featured by a fixed nozzle starting to deliver only when the container, overturned, is pressed downwards, allowing the operator to work under safe conditions.
    INLET
    ½inch F. BSP
    SIZE
    SLIM
    VERSION
    WITH VALVE
View as List Grid

Items 31-45 of 70

per page
Set Descending Direction