Search results for: 'WA 0859 3970 0884 RAB Pasang Partisi Kaca Aluminium Per Meter Banguntapan Bantul'

Cod. P0004072
The pump allows the liquid chemical to be transferred from the manufacturer’s container to the sprayer in maximum safety. The pump is made entirely of polypropylene with Viton seals. It can transfer liquid from 20 litre cans up to 200 litre drums. It is fitted with three different adapters for sampling holes of from 46.5 mm up to 60 mm. The internal tube consists of four pieces that can be adjusted according to the height of the sample receptacle. The metering unit tap can be mounted directly on the pump or it can be left free with a flexible tube. The tap handle can be used in two different operating modes: the first with continuous flow opening, the second, with short pulses for fine metering. It is not necessary for the operator to pump continuously. Flow rate from 8 to 20 litres per minute depending on the viscosity of the liquid.

Cod. RC379016
DISPLAY FOR FLOW MEASUREMENT AND READING
The programmable multilingual graphic display can indicate: cumulative volume delivered (resettable), cumulative volume delivered (not resettable) and partial volume in different units of measure: litres/gallons per minute, cubic metres per hour. It can be applied to all our turbine flowmeters. Maximum reading error: ±1%. Backlit display. 9 Volts battery powered. Equipped with luminosity sensor to increase endurance and energy saving.

Cod. 0037901C
DISPLAY FOR FLOW MEASUREMENT AND READING
The programmable multilingual graphic display can indicate: cumulative volume delivered (resettable), cumulative volume delivered (not resettable) and partial volume in different units of measure: litres/gallons per minute, cubic metres per hour. It can be applied to all our turbine flowmeters. Maximum reading error: ±1%. Backlit display. 9 Volts battery powered. Equipped with luminosity sensor to increase endurance and energy saving.

Cod. 00379016
DISPLAY FOR FLOW MEASUREMENT AND READING
The programmable multilingual graphic display can indicate: cumulative volume delivered (resettable), cumulative volume delivered (not resettable) and partial volume in different units of measure: litres/gallons per minute, cubic metres per hour. It can be applied to all our turbine flowmeters. Maximum reading error: ±1%. Backlit display. 9 Volts battery powered. Equipped with luminosity sensor to increase endurance and energy saving.

Cod. T0370365.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370355.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370345.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370335.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370325.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370320.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. 00167000
SERIES OF ADJUSTABLE NOZZLES FOR LIQUID FERTILIZER. Fertiljet consists of a compact nylon body on which has been installed a series of adjustable and interchangeable stainless steel nozzles of different sizes. It is ideal for flat spraying and dispensing without a boom, with good coverage from 16 to 20 meters. Fertiljet has a 3-way feed and can be used for uniform or partial spraying, with independent control of the openings for the left and right outlets.

Cod. 15277599
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.

Cod. 15277499
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.

Cod. 15277399
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.

Cod. 15277299
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.