Search results for: 'WA 0812 2782 5310 Fee Pasang Pintu Aluminium Untuk Kamar Terpercaya Umbulharjo Yogyakarta'

Cod. 68112199
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110499
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110399
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110299
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68121799
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. PHY00152
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. PHY05133
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. P0005133
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. P1000152
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. P0290005
Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.

Cod. P0290004
Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.

Cod. P0290003
Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.

Cod. P0290002
Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.

Cod. 00167000
SERIES OF ADJUSTABLE NOZZLES FOR LIQUID FERTILIZER. Fertiljet consists of a compact nylon body on which has been installed a series of adjustable and interchangeable stainless steel nozzles of different sizes. It is ideal for flat spraying and dispensing without a boom, with good coverage from 16 to 20 meters. Fertiljet has a 3-way feed and can be used for uniform or partial spraying, with independent control of the openings for the left and right outlets.

Cod. 6343409A
“G” 3-way pressure regulating safety valve. It is made of plastic and stainless steel with antiacid rubber membrane. It can be fitted on the feed side to regulate the operating pressure of the mixer. The spring system allows also using it as safety valve.