Search results for: 'WA 0821 7001 0763 (MEVVAH) Harga Panel Marmer Pvc Per Lembar Anyar Kabupaten Serang Banten'

Cod. 44302799
EXTRACTABLE FLOWMETER easy to apply and connect to any pipe of different diameter for perfect flow measurement. The compact size allows only partially occupying the duct leaving the inner span of the pipe almost completely free. Sin-wave, square-wave and 4-20 mA sensors. Battery-operated or 12V electrically-operated displays to view units per minute and totals, expressed in litres, hectolitres, cubic metres or gallons. Error percentage: ±3%. Response time: 3 sec.

Cod. 44312799
EXTRACTABLE FLOWMETER easy to apply and connect to any pipe of different diameter for perfect flow measurement. The compact size allows only partially occupying the duct leaving the inner span of the pipe almost completely free. Sin-wave, square-wave and 4-20 mA sensors. Battery-operated or 12V electrically-operated displays to view units per minute and totals, expressed in litres, hectolitres, cubic metres or gallons. Error percentage: ±3%. Response time: 3 sec.

Cod. 63433599
1” ball valve complete with chemical dissolving nozzle. It is a 3-way valve with quick-coupling that can be attached on the outside of the mixer hopper to perform the following functions: 1) feed the Venturi system for mixer emptying; 2) feed the internal hopper nozzle to dissolve the chemicals; 3) feed the quick-funnel by means of the control taps.

Cod. 63432899
1”¼ ball valve complete with chemical dissolving nozzle. It is a 5-way valve with threaded flanges and/or quick-couplings that can be attached on the outside of the mixer hopper to perform the following functions: 1) feed the Venturi system for mixer emptying; 2) feed the internal hopper nozzle to dissolve the chemicals; 3) feed the quick-funnel by means of the control taps; 4) external feed for auxiliary functions. It can be coupled to the “G” pressure regulating safety valve.

Cod. CH370000
INSTRUMENT FOR MEASURING AND READING REVOLUTIONS PER MINUTE. The 12 VDC powered, backlit Pony RPM in real-time measures the RPM of any rotary shaft fitted with a toothed measuring disk connected to the display. It is equipped with a device for remote control of an actuator or electric motor to increase or decrease the RPM. The operator can set the minimum and maximum value via the keypad together with the “0” value. Suitable for use with weeding booms with air sleeve.

Cod. P0004072
The pump allows the liquid chemical to be transferred from the manufacturer’s container to the sprayer in maximum safety. The pump is made entirely of polypropylene with Viton seals. It can transfer liquid from 20 litre cans up to 200 litre drums. It is fitted with three different adapters for sampling holes of from 46.5 mm up to 60 mm. The internal tube consists of four pieces that can be adjusted according to the height of the sample receptacle. The metering unit tap can be mounted directly on the pump or it can be left free with a flexible tube. The tap handle can be used in two different operating modes: the first with continuous flow opening, the second, with short pulses for fine metering. It is not necessary for the operator to pump continuously. Flow rate from 8 to 20 litres per minute depending on the viscosity of the liquid.

Cod. P0005142
TECHNICAL FEATURES · Filling and transferring of liquids. · Mixing of chemical products. · Internal washing of empty containers for chemical products. · Independent washing of the systems composing the unit. · Washing of the Sprayer. · Collection of the residues remaining in the Sprayer. TECHNICAL STRUCTURE · Polyethylene tanks with various capacities, fitted with cover equipped with quick funnel with rotating nozzles, wide angles flat nozzles for dissolving chemical products, vortex system for mixing and suction system for quick emptying.

Cod. 00185600
TECHNICAL FEATURES · Filling and transferring of liquids. · Mixing of chemical products. · Internal washing of empty containers for chemical products. · Independent washing of the systems composing the unit. · Washing of the Sprayer. · Collection of the residues remaining in the Sprayer. TECHNICAL STRUCTURE · Polyethylene tanks with various capacities, fitted with cover equipped with quick funnel with rotating nozzles, wide angles flat nozzles for dissolving chemical products, vortex system for mixing and suction system for quick emptying. · 500 liters/minute Centrifugal Pump. · 5,5 Kw Explosion Engine (Honda or Lombardini) to activate the Centrifugal Pump. · Cataphoresis treated steel frame, complete with wheels for movements. · Some models are equipped with an auxiliary tank to contain clean water, and with a 3·points connection for the coupling to the tractor lifter. · Tandem Ball Valve to control all the operative phases: A1 connected to suction. B1 connected to delivery.

Cod. 001859EL
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.

Cod. 00185900
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.

Cod. 001858EL
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.

Cod. 00185800
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.

Cod. 001857EL
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.

Cod. 00185700
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.

Cod. 001869RR.VER
Capacity 29 litres. Used for mixing: liquid, powder and granular chemicals as well as chemicals contained in water-soluble bags. The accessory features an Energet rotatory nozzle. Standard features on all the models are: quick funnel, nozzle for dissolving products, external support frame, external inspection pot, water glass with graduated scale and aspiration kit for the external aspiration of chemical products. Its symmetrical structure makes it easy to install on any type of sprayer. Fitted with a gun and tube kit.
A double cover protects the service accessories useable only during the mixing phase.
It is available in a range of different colors.