Search results for: 'WA 0859 3970 0884 Jasa Pembuatan Rumah 5 X 12 Ngaliyan Semarang'

Cod. 6340849S
This product is used to clean chemical products out of emptied containers before they are disposed of. It consists of a central shaft on which rotates a fluid-activated nozzle that is able to rotate through 360° to spray the inner surfaces of the container. The nozzle has tips at its end which allows it to break the protective film on sealed containers holding chemical products. It is made using anticorrosive material. Versions: with 1/2” BSP male connector and 18x1.5 male connector. The version with valve is featured by a fixed nozzle starting to deliver only when the container, overturned, is pressed downwards, allowing the operator to work under safe conditions.

Cod. 634116SV
This product is used to clean chemical products out of emptied containers before they are disposed of. It consists of a central shaft on which rotates a fluid-activated nozzle that is able to rotate through 360° to spray the inner surfaces of the container. The nozzle has tips at its end which allows it to break the protective film on sealed containers holding chemical products. It is made using anticorrosive material. Versions: with 1/2” BSP male connector and 18x1.5 male connector. The version with valve is featured by a fixed nozzle starting to deliver only when the container, overturned, is pressed downwards, allowing the operator to work under safe conditions.

Cod. 6341169V
This product is used to clean chemical products out of emptied containers before they are disposed of. It consists of a central shaft on which rotates a fluid-activated nozzle that is able to rotate through 360° to spray the inner surfaces of the container. The nozzle has tips at its end which allows it to break the protective film on sealed containers holding chemical products. It is made using anticorrosive material. Versions: with 1/2” BSP male connector and 18x1.5 male connector. The version with valve is featured by a fixed nozzle starting to deliver only when the container, overturned, is pressed downwards, allowing the operator to work under safe conditions.

Cod. 63412499
This product is used to clean chemical products out of emptied containers before they are disposed of. It consists of a central shaft on which rotates a fluid-activated nozzle that is able to rotate through 360° to spray the inner surfaces of the container. The nozzle has tips at its end which allows it to break the protective film on sealed containers holding chemical products. It is made using anticorrosive material. Versions: with 1/2” BSP male connector and 18x1.5 male connector. The version with valve is featured by a fixed nozzle starting to deliver only when the container, overturned, is pressed downwards, allowing the operator to work under safe conditions.

Cod. 63411699
This product is used to clean chemical products out of emptied containers before they are disposed of. It consists of a central shaft on which rotates a fluid-activated nozzle that is able to rotate through 360° to spray the inner surfaces of the container. The nozzle has tips at its end which allows it to break the protective film on sealed containers holding chemical products. It is made using anticorrosive material. Versions: with 1/2” BSP male connector and 18x1.5 male connector. The version with valve is featured by a fixed nozzle starting to deliver only when the container, overturned, is pressed downwards, allowing the operator to work under safe conditions.

Cod. 413L0399

Cod. P0005810.4
"3,5” digital color touchscreen display. Photo sensor to regulate back lighting. French, English, Italian and German multilingual menu. USB port for data collection. Energy-saving with turning off after some minutes of inactivity. Choice of the number of decimals after comma. ISOBUS Protocol. Rear coupling system with provision of suction cup attachment. 12Vcc power supply. Connected to a flowmeter, the display indicates real time lit/min flowrate and total flowrate. Setting of desired quantities also available to obtain an outlet signal once the required value is reached. The outlet signal (2,6A) can produce luminous or audio pulses, can drive a 12Vcc gear motor or an electrovalve or an engine. Also compatible with RAM-MOUNT suction cup."

Cod. P0005753
Pro-Flow with turbine flowmeter and programmable automatic stopping allows programming the desired amount of liquid transfer. Once the set amount is reached, the system automatically stops the flow. Supplied with a 2” threaded male coupling. 9V battery power supply included or with a 12VDC external power supply. Digital display, USB port to export the operating data, NO/NC contact output and input signal for connection to the filling level sensor. Flow rate up to 500 litres/minute (132 GPM) and maximum operating pressure of 12 bar (174 psi).

Cod. P0005810-1
"3,5” digital color touchscreen display. Photo sensor to regulate back lighting. French, English, Italian and German multilingual menu. USB port for data collection. Energy-saving with turning off after some minutes of inactivity. Choice of the number of decimals after comma. ISOBUS Protocol. Rear coupling system with provision of suction cup attachment. It has two signals inputs for measuring the flow, speed and filling level. 12Vcc power supply. Connected to a flowmeter the display indicates cumulative volume delivered (resettable) up to 999.999 units and partial volume in different units of measure: litres, Usa gallons, mc/h. Setting of pulses for calibration of liquids under several temperatures and viscosities. Setting of pulses for flowmeters from ½” to 4”. Can be connected to square wave sensors. RAM-MOUNT suction cup compatible."

Cod. 00185600
TECHNICAL FEATURES · Filling and transferring of liquids. · Mixing of chemical products. · Internal washing of empty containers for chemical products. · Independent washing of the systems composing the unit. · Washing of the Sprayer. · Collection of the residues remaining in the Sprayer. TECHNICAL STRUCTURE · Polyethylene tanks with various capacities, fitted with cover equipped with quick funnel with rotating nozzles, wide angles flat nozzles for dissolving chemical products, vortex system for mixing and suction system for quick emptying. · 500 liters/minute Centrifugal Pump. · 5,5 Kw Explosion Engine (Honda or Lombardini) to activate the Centrifugal Pump. · Cataphoresis treated steel frame, complete with wheels for movements. · Some models are equipped with an auxiliary tank to contain clean water, and with a 3·points connection for the coupling to the tractor lifter. · Tandem Ball Valve to control all the operative phases: A1 connected to suction. B1 connected to delivery.

Cod. TXT70395
STAINLESS STEEL (304-316) AXIAL-FLOW TURBINE FLOWMETER. Stainless steel body (304-316) in the versions with antacid plastic ducts (PVDF) or stainless steel ducts. This is the most suitable flowmeter for measuring corrosive and abrasive liquid chemical products at high working pressures. It can be used with a sinusoidal-wave or square-wave sensor, 4-20 mA.

Cod. TXT70196
STAINLESS STEEL (304-316) AXIAL-FLOW TURBINE FLOWMETER. Stainless steel body (304-316) in the versions with antacid plastic ducts (PVDF) or stainless steel ducts. This is the most suitable flowmeter for measuring corrosive and abrasive liquid chemical products at high working pressures. It can be used with a sinusoidal-wave or square-wave sensor, 4-20 mA.

Cod. TX370395
STAINLESS STEEL (304-316) AXIAL-FLOW TURBINE FLOWMETER. Stainless steel body (304-316) in the versions with antacid plastic ducts (PVDF) or stainless steel ducts. This is the most suitable flowmeter for measuring corrosive and abrasive liquid chemical products at high working pressures. It can be used with a sinusoidal-wave or square-wave sensor, 4-20 mA.

Cod. TX370196
STAINLESS STEEL (304-316) AXIAL-FLOW TURBINE FLOWMETER. Stainless steel body (304-316) in the versions with antacid plastic ducts (PVDF) or stainless steel ducts. This is the most suitable flowmeter for measuring corrosive and abrasive liquid chemical products at high working pressures. It can be used with a sinusoidal-wave or square-wave sensor, 4-20 mA.

Cod. TPT70395
STAINLESS STEEL (304-316) AXIAL-FLOW TURBINE FLOWMETER. Stainless steel body (304-316) in the versions with antacid plastic ducts (PVDF) or stainless steel ducts. This is the most suitable flowmeter for measuring corrosive and abrasive liquid chemical products at high working pressures. It can be used with a sinusoidal-wave or square-wave sensor, 4-20 mA.