Search results for: 'WA 0859 3970 0884 Fee Pembuatan GreenHouse Tanaman Anggur Tembalang Semarang'

Cod. 63433599
1” ball valve complete with chemical dissolving nozzle. It is a 3-way valve with quick-coupling that can be attached on the outside of the mixer hopper to perform the following functions: 1) feed the Venturi system for mixer emptying; 2) feed the internal hopper nozzle to dissolve the chemicals; 3) feed the quick-funnel by means of the control taps.

Cod. 63463499
Mixer cover with hinges, handle, quick-funnel and a set of 2 funnel feed taps. The structure is made of plastic and some parts in stainless steel. The external hinge system allows easily fitting it on mixer hoppers. It is equipped with an Energet funnel for draining and rinsing the chemical containers as well as washing the inside of the hopper. The control taps feed the Energet funnel providing practical and safe use by the operator.

Cod. 63463399
Mixer cover with hinges, handle, quick-funnel and a set of 2 funnel feed taps. The structure is made of plastic and some parts in stainless steel. The external hinge system allows easily fitting it on mixer hoppers. It is equipped with an Energet funnel for draining and rinsing the chemical containers as well as washing the inside of the hopper. The control taps feed the Energet funnel providing practical and safe use by the operator.

Cod. 63463299
Mixer cover with hinges, handle, quick-funnel and a set of 2 funnel feed taps. The structure is made of plastic and some parts in stainless steel. The external hinge system allows easily fitting it on mixer hoppers. It is equipped with an Energet funnel for draining and rinsing the chemical containers as well as washing the inside of the hopper. The control taps feed the Energet funnel providing practical and safe use by the operator.

Cod. 63462799
Mixer cover with hinges, handle, quick-funnel and a set of 2 funnel feed taps. The structure is made of plastic and some parts in stainless steel. The external hinge system allows easily fitting it on mixer hoppers. It is equipped with an Energet funnel for draining and rinsing the chemical containers as well as washing the inside of the hopper. The control taps feed the Energet funnel providing practical and safe use by the operator.

Cod. 68112199
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110499
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110399
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110299
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68121799
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. PHY00152
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. PHY05133
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. P0005133
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. P1000152
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. P0290005
Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.