Search results for: 'WA 0852 2611 9277 Total Biaya Renovasi Wall Moulding Gypsum Kamar Daerah Tebet Jakarta Selatan'

Cod. P0290004
Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.

Cod. P0290003
Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.

Cod. P0290002
Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.

Cod. 44314799
EXTRACTABLE FLOWMETER easy to apply and connect to any pipe of different diameter for perfect flow measurement. The compact size allows only partially occupying the duct leaving the inner span of the pipe almost completely free. Sin-wave, square-wave and 4-20 mA sensors. Battery-operated or 12V electrically-operated displays to view units per minute and totals, expressed in litres, hectolitres, cubic metres or gallons. Error percentage: ±3%. Response time: 3 sec.

Cod. 44312899
EXTRACTABLE FLOWMETER easy to apply and connect to any pipe of different diameter for perfect flow measurement. The compact size allows only partially occupying the duct leaving the inner span of the pipe almost completely free. Sin-wave, square-wave and 4-20 mA sensors. Battery-operated or 12V electrically-operated displays to view units per minute and totals, expressed in litres, hectolitres, cubic metres or gallons. Error percentage: ±3%. Response time: 3 sec.

Cod. 44302799
EXTRACTABLE FLOWMETER easy to apply and connect to any pipe of different diameter for perfect flow measurement. The compact size allows only partially occupying the duct leaving the inner span of the pipe almost completely free. Sin-wave, square-wave and 4-20 mA sensors. Battery-operated or 12V electrically-operated displays to view units per minute and totals, expressed in litres, hectolitres, cubic metres or gallons. Error percentage: ±3%. Response time: 3 sec.

Cod. 44312799
EXTRACTABLE FLOWMETER easy to apply and connect to any pipe of different diameter for perfect flow measurement. The compact size allows only partially occupying the duct leaving the inner span of the pipe almost completely free. Sin-wave, square-wave and 4-20 mA sensors. Battery-operated or 12V electrically-operated displays to view units per minute and totals, expressed in litres, hectolitres, cubic metres or gallons. Error percentage: ±3%. Response time: 3 sec.

Cod. P0005810.4
"3,5” digital color touchscreen display. Photo sensor to regulate back lighting. French, English, Italian and German multilingual menu. USB port for data collection. Energy-saving with turning off after some minutes of inactivity. Choice of the number of decimals after comma. ISOBUS Protocol. Rear coupling system with provision of suction cup attachment. 12Vcc power supply. Connected to a flowmeter, the display indicates real time lit/min flowrate and total flowrate. Setting of desired quantities also available to obtain an outlet signal once the required value is reached. The outlet signal (2,6A) can produce luminous or audio pulses, can drive a 12Vcc gear motor or an electrovalve or an engine. Also compatible with RAM-MOUNT suction cup."

Cod. 00379005
Liquid measuring and reading instrument with timed intermittent output signal. Liquid measuring and reading instrument with timed intermittent output signal. Connected to a flow meter it displays the real-time flow rate and the total flow rate. The desired quantity can be set to obtain an output signal (12 VDC 5A) controlled by a programmable timer. This function is activated at each multiple of the quantity set.

Cod. 00379015
Liquid measuring and reading instrument with timed intermittent output signal. Liquid measuring and reading instrument with timed intermittent output signal. Connected to a flow meter it displays the real-time flow rate and the total flow rate. The desired quantity can be set to obtain an output signal (12 VDC 5A) controlled by a programmable timer. This function is activated at each multiple of the quantity set.

Cod. P0005142
TECHNICAL FEATURES · Filling and transferring of liquids. · Mixing of chemical products. · Internal washing of empty containers for chemical products. · Independent washing of the systems composing the unit. · Washing of the Sprayer. · Collection of the residues remaining in the Sprayer. TECHNICAL STRUCTURE · Polyethylene tanks with various capacities, fitted with cover equipped with quick funnel with rotating nozzles, wide angles flat nozzles for dissolving chemical products, vortex system for mixing and suction system for quick emptying.

Cod. 00185600
TECHNICAL FEATURES · Filling and transferring of liquids. · Mixing of chemical products. · Internal washing of empty containers for chemical products. · Independent washing of the systems composing the unit. · Washing of the Sprayer. · Collection of the residues remaining in the Sprayer. TECHNICAL STRUCTURE · Polyethylene tanks with various capacities, fitted with cover equipped with quick funnel with rotating nozzles, wide angles flat nozzles for dissolving chemical products, vortex system for mixing and suction system for quick emptying. · 500 liters/minute Centrifugal Pump. · 5,5 Kw Explosion Engine (Honda or Lombardini) to activate the Centrifugal Pump. · Cataphoresis treated steel frame, complete with wheels for movements. · Some models are equipped with an auxiliary tank to contain clean water, and with a 3·points connection for the coupling to the tractor lifter. · Tandem Ball Valve to control all the operative phases: A1 connected to suction. B1 connected to delivery.

Cod. 001859EL
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.

Cod. 00185900
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.

Cod. 001858EL
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.