Cod. P0000890 The clamp is used to couple the air sleeve duct to the load-bearing structure of the boom. Its particular shape allows the duct to move on the horizontal plane to prevent damage to the PVC sheet during boom movements. Made of reinforced plastic.
Cod. 15277599 700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.
Cod. 15277499 700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.
Cod. 15277399 700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.
Cod. 15277299 700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.
Cod. 15277199 700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.
Cod. 15277099 700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.
Cod. P0290005 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0290004 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0290003 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0290002 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0005142 TECHNICAL FEATURES · Filling and transferring of liquids. · Mixing of chemical products. · Internal washing of empty containers for chemical products. · Independent washing of the systems composing the unit. · Washing of the Sprayer. · Collection of the residues remaining in the Sprayer. TECHNICAL STRUCTURE · Polyethylene tanks with various capacities, fitted with cover equipped with quick funnel with rotating nozzles, wide angles flat nozzles for dissolving chemical products, vortex system for mixing and suction system for quick emptying.
Cod. 00185600 TECHNICAL FEATURES · Filling and transferring of liquids. · Mixing of chemical products. · Internal washing of empty containers for chemical products. · Independent washing of the systems composing the unit. · Washing of the Sprayer. · Collection of the residues remaining in the Sprayer. TECHNICAL STRUCTURE · Polyethylene tanks with various capacities, fitted with cover equipped with quick funnel with rotating nozzles, wide angles flat nozzles for dissolving chemical products, vortex system for mixing and suction system for quick emptying. · 500 liters/minute Centrifugal Pump. · 5,5 Kw Explosion Engine (Honda or Lombardini) to activate the Centrifugal Pump. · Cataphoresis treated steel frame, complete with wheels for movements. · Some models are equipped with an auxiliary tank to contain clean water, and with a 3·points connection for the coupling to the tractor lifter. · Tandem Ball Valve to control all the operative phases: A1 connected to suction. B1 connected to delivery.
Cod. 001859EL MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.
Cod. 00185900 MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.
DUCT COUPLING CLAMPCod. P0000890
MANUAL PISTON VALVE ASSEMBLYCod. P0290005
ECOTROLLCod. P0005142
ECOMOBCod. 00185600
ECOBUS 600Cod. 001859EL