Search results for: 'WA 0821 7001 0763 (MEVVAH) dinding marmer hitam Ulu Moro O Kabupaten Nias Barat Sumatera Utara'

Cod. RC379016
DISPLAY FOR FLOW MEASUREMENT AND READING
The programmable multilingual graphic display can indicate: cumulative volume delivered (resettable), cumulative volume delivered (not resettable) and partial volume in different units of measure: litres/gallons per minute, cubic metres per hour. It can be applied to all our turbine flowmeters. Maximum reading error: ±1%. Backlit display. 9 Volts battery powered. Equipped with luminosity sensor to increase endurance and energy saving.

Cod. 0037901C
DISPLAY FOR FLOW MEASUREMENT AND READING
The programmable multilingual graphic display can indicate: cumulative volume delivered (resettable), cumulative volume delivered (not resettable) and partial volume in different units of measure: litres/gallons per minute, cubic metres per hour. It can be applied to all our turbine flowmeters. Maximum reading error: ±1%. Backlit display. 9 Volts battery powered. Equipped with luminosity sensor to increase endurance and energy saving.

Cod. 00379016
DISPLAY FOR FLOW MEASUREMENT AND READING
The programmable multilingual graphic display can indicate: cumulative volume delivered (resettable), cumulative volume delivered (not resettable) and partial volume in different units of measure: litres/gallons per minute, cubic metres per hour. It can be applied to all our turbine flowmeters. Maximum reading error: ±1%. Backlit display. 9 Volts battery powered. Equipped with luminosity sensor to increase endurance and energy saving.

Cod. P0004072
The pump allows the liquid chemical to be transferred from the manufacturer’s container to the sprayer in maximum safety. The pump is made entirely of polypropylene with Viton seals. It can transfer liquid from 20 litre cans up to 200 litre drums. It is fitted with three different adapters for sampling holes of from 46.5 mm up to 60 mm. The internal tube consists of four pieces that can be adjusted according to the height of the sample receptacle. The metering unit tap can be mounted directly on the pump or it can be left free with a flexible tube. The tap handle can be used in two different operating modes: the first with continuous flow opening, the second, with short pulses for fine metering. It is not necessary for the operator to pump continuously. Flow rate from 8 to 20 litres per minute depending on the viscosity of the liquid.

Cod. P0005694
Made of galvanised steel it can be applied on any Polmac mixer for installation on any type of sprayer. It can be extended up to a maximum height of 75 centimetres. The returning action is facilitated by a return spring, and it is fitted with a safety hook for the closed position.

Cod. 63411399
Made of galvanised steel it can be applied on any Polmac mixer for installation on any type of sprayer. It can be extended up to a maximum height of 75 centimetres. The returning action is facilitated by a return spring, and it is fitted with a safety hook for the closed position.

Cod. 00375701
Radial turbine plastic flowmeter for low flow rates (0.3 l/min to 9 l/min). BSP ¼" male threaded couplings with possibility of attachment to quick-couplings. Proximity sensor with LED to indicate operation. Made of plastic material resistant to corrosive liquid. Maximum operating pressure: 20 bar. The internal component coupling and the low proximity sensor magnetism allow the turbine to operate even at low flow rates while maintaining the reading accuracy at ±1%.

Cod. 00375702
Radial turbine plastic flowmeter for low flow rates (0.3 l/min to 9 l/min). BSP ¼" male threaded couplings with possibility of attachment to quick-couplings. Proximity sensor with LED to indicate operation. Made of plastic material resistant to corrosive liquid. Maximum operating pressure: 20 bar. The internal component coupling and the low proximity sensor magnetism allow the turbine to operate even at low flow rates while maintaining the reading accuracy at ±1%.

Cod. 15277599
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.

Cod. 15277499
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.

Cod. 15277399
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.

Cod. 15277299
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.

Cod. 15277199
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.

Cod. 15277099
700 Ø 14-blade turbine with painted steel structure and protection grille. 22.5 cc gear motor. Oxidised aluminium duct kit and plastic air emission ducts perpendicular to the ground. Central and side PVC sheeting kit complete with elastic bands and straps. Coupling kit with return springs.

Cod. 20130199
ELECTRICAL INTAKE SYSTEM. The peristaltic pumps are used to metre and transfer a liquid chemical product in units. The control system can operate on up a maximum of 4 peristaltic pumps for metering 4 liquid chemical products. The peristaltic pumps send the metered product to the piston pump which injects the chemical product into the pressure line. Two models: P100 and P150. Peristaltic pump P100 takes hoses of Ø3.2mm, Ø6.4mm and Ø9.6mm; peristaltic pump P150 takes hoses of Ø12mm and Ø17mm. These are activated by a a multiphase reduction motor with variable Rpm.