Search results for: 'WA 0812 2782 5310 Jasa Pemborong Rumah Kayu Bungalow Di Lendah Kulon Progo'

Cod. 13003110
Wide angle flat spray nozzles with bayonet coupling in different shapes and sizes suitable for liquid fertilizer spraying and irrigation. Made of plastic material resistant to aggressive chemical products.

Cod. VTCD6000
The modular valve was born of the experience with the recirculation valve and the tandem valve and uses both technical concepts to control the entire distribution of the sprayer including the main on/off valve and the proportional pressure valve. Aluminium body treated with a cataphoresis cycle. Viton O-rings and Teflon-PTFE seals. Interchangeable Nylon flanges with different couplings and sizes. Possibility of constructing various models based on the sizes and the technical requirements to be satisfied.

Cod. P0004918
Polmac presents the Cup Key to put up and remove spraying nozzles on the booms spraying pesticides. The nozzle is currently fit and removed from the nozzle-holder by hand with big difficulty. Without the use of any protective device, injuries to fingers and the certain contact with chemical products are to be risked, while the help of gloves doesn’t assure any handiness, due to the small size of the nozzle and the narrow space of the structure (spraying boom) on which they are mounted. For fitting on the nozzle-holder, the nozzle with bayonet connection has to be inserted into the Cup Key and a 45° circular move has to be effected up to the locking of the nozzle. The removal procedure is carried out following the reversed operation. At the end of these operations the Cup Key has to be removed to be used afterwards.

Cod. P0004911
Polmac presents the Cup Key to put up and remove spraying nozzles on the booms spraying pesticides. The nozzle is currently fit and removed from the nozzle-holder by hand with big difficulty. Without the use of any protective device, injuries to fingers and the certain contact with chemical products are to be risked, while the help of gloves doesn’t assure any handiness, due to the small size of the nozzle and the narrow space of the structure (spraying boom) on which they are mounted. For fitting on the nozzle-holder, the nozzle with bayonet connection has to be inserted into the Cup Key and a 45° circular move has to be effected up to the locking of the nozzle. The removal procedure is carried out following the reversed operation. At the end of these operations the Cup Key has to be removed to be used afterwards.

Cod. P0004974
Polmac presents the Cup Key to put up and remove spraying nozzles on the booms spraying pesticides. The nozzle is currently fit and removed from the nozzle-holder by hand with big difficulty. Without the use of any protective device, injuries to fingers and the certain contact with chemical products are to be risked, while the help of gloves doesn’t assure any handiness, due to the small size of the nozzle and the narrow space of the structure (spraying boom) on which they are mounted. For fitting on the nozzle-holder, the nozzle with bayonet connection has to be inserted into the Cup Key and a 45° circular move has to be effected up to the locking of the nozzle. The removal procedure is carried out following the reversed operation. At the end of these operations the Cup Key has to be removed to be used afterwards.

Cod. 83125200
The power supply must be chosen on the basis of the power absorbed by your application, taking into consideration that our displays have an absorption no greater than 0.5A uncharged.

Cod. 83125800
The power supply must be chosen on the basis of the power absorbed by your application, taking into consideration that our displays have an absorption no greater than 0.5A uncharged.

Cod. 83125600
The power supply must be chosen on the basis of the power absorbed by your application, taking into consideration that our displays have an absorption no greater than 0.5A uncharged.

Cod. 83125400
The power supply must be chosen on the basis of the power absorbed by your application, taking into consideration that our displays have an absorption no greater than 0.5A uncharged.

Cod. 83125500
The power supply must be chosen on the basis of the power absorbed by your application, taking into consideration that our displays have an absorption no greater than 0.5A uncharged.

Cod. T0370365.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370355.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370345.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370335.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370325.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.