Search results for: 'WA 0812 2782 5310 Borongan Jasa Cat Rumah 2 Lantai 9 X 12 Terpercaya Sewon Bantul'

Cod. 413195AL

Cod. 303087AL

Cod. 41310699

Cod. 30304399

Cod. 30303399

Cod. 30300232

Cod. P0004072
The pump allows the liquid chemical to be transferred from the manufacturer’s container to the sprayer in maximum safety. The pump is made entirely of polypropylene with Viton seals. It can transfer liquid from 20 litre cans up to 200 litre drums. It is fitted with three different adapters for sampling holes of from 46.5 mm up to 60 mm. The internal tube consists of four pieces that can be adjusted according to the height of the sample receptacle. The metering unit tap can be mounted directly on the pump or it can be left free with a flexible tube. The tap handle can be used in two different operating modes: the first with continuous flow opening, the second, with short pulses for fine metering. It is not necessary for the operator to pump continuously. Flow rate from 8 to 20 litres per minute depending on the viscosity of the liquid.

Cod. 10435099
The kit can be installed on any model of ball valves and allows the user to excite, manually moving the lever, the microswitch card measuring the position of the ball, so that to forward it to a remote visual electronic system, properly connected to the connectors given as an equipment. It can be used in any application where it is not possible to motorise the ball valve but is necessary to know its position at distance. The microswitch card can be powered at 12 Vcc. and 24 Vcc., 5A maximum. The microswitch card is located inside an aluminium structure, carefully protected.

Cod. 10433799
The kit can be installed on any model of ball valves and allows the user to excite, manually moving the lever, the microswitch card measuring the position of the ball, so that to forward it to a remote visual electronic system, properly connected to the connectors given as an equipment. It can be used in any application where it is not possible to motorise the ball valve but is necessary to know its position at distance. The microswitch card can be powered at 12 Vcc. and 24 Vcc., 5A maximum. The microswitch card is located inside an aluminium structure, carefully protected.

Cod. 42305199
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 42306399
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 42305599
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 42305499
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 41321299
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 42300432
Both THE NUT and THE BACK NUT are moulded in red, always and exclusively nylon.