Search results for: 'WA 0812 2782 5310 Harga Tukang Renovasi Rumah 2 Lantai Ruko Murah Paranggupito Wonogiri'

Cod. 30300232

Cod. 00379011
Available in the sizes 1”½ (20-400 l/min) and 2” (45-900 l/min). Maximum pressure 8 bar. Because there are no internal moving parts, it is particularly suitable for measuring aggressive liquids or with small suspended solid particles. Compared to the Pro-Flow version with turbine flowmeter, this model does not offer the acoustic signal, external 5A device control and level sensor connection functions.

Cod. P0005753
Pro-Flow with turbine flowmeter and programmable automatic stopping allows programming the desired amount of liquid transfer. Once the set amount is reached, the system automatically stops the flow. Supplied with a 2” threaded male coupling. 9V battery power supply included or with a 12VDC external power supply. Digital display, USB port to export the operating data, NO/NC contact output and input signal for connection to the filling level sensor. Flow rate up to 500 litres/minute (132 GPM) and maximum operating pressure of 12 bar (174 psi).

Cod. P0004072
The pump allows the liquid chemical to be transferred from the manufacturer’s container to the sprayer in maximum safety. The pump is made entirely of polypropylene with Viton seals. It can transfer liquid from 20 litre cans up to 200 litre drums. It is fitted with three different adapters for sampling holes of from 46.5 mm up to 60 mm. The internal tube consists of four pieces that can be adjusted according to the height of the sample receptacle. The metering unit tap can be mounted directly on the pump or it can be left free with a flexible tube. The tap handle can be used in two different operating modes: the first with continuous flow opening, the second, with short pulses for fine metering. It is not necessary for the operator to pump continuously. Flow rate from 8 to 20 litres per minute depending on the viscosity of the liquid.

Cod. 10435099
The kit can be installed on any model of ball valves and allows the user to excite, manually moving the lever, the microswitch card measuring the position of the ball, so that to forward it to a remote visual electronic system, properly connected to the connectors given as an equipment. It can be used in any application where it is not possible to motorise the ball valve but is necessary to know its position at distance. The microswitch card can be powered at 12 Vcc. and 24 Vcc., 5A maximum. The microswitch card is located inside an aluminium structure, carefully protected.

Cod. 10433799
The kit can be installed on any model of ball valves and allows the user to excite, manually moving the lever, the microswitch card measuring the position of the ball, so that to forward it to a remote visual electronic system, properly connected to the connectors given as an equipment. It can be used in any application where it is not possible to motorise the ball valve but is necessary to know its position at distance. The microswitch card can be powered at 12 Vcc. and 24 Vcc., 5A maximum. The microswitch card is located inside an aluminium structure, carefully protected.

Cod. 42305199
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 42306399
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 42305599
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 42305499
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 41321299
Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

Cod. 42300432
Both THE NUT and THE BACK NUT are moulded in red, always and exclusively nylon.

Cod. 1040933N

Cod. P0002788

Cod. 1040813N