Cod. P0004072 The pump allows the liquid chemical to be transferred from the manufacturer’s container to the sprayer in maximum safety. The pump is made entirely of polypropylene with Viton seals. It can transfer liquid from 20 litre cans up to 200 litre drums. It is fitted with three different adapters for sampling holes of from 46.5 mm up to 60 mm. The internal tube consists of four pieces that can be adjusted according to the height of the sample receptacle. The metering unit tap can be mounted directly on the pump or it can be left free with a flexible tube. The tap handle can be used in two different operating modes: the first with continuous flow opening, the second, with short pulses for fine metering. It is not necessary for the operator to pump continuously. Flow rate from 8 to 20 litres per minute depending on the viscosity of the liquid.
Cod. 68121899 ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. 24 Vcc. Motorizations against demand.
Cod. 001826DR.VER ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001826DR.YEL ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001826DR ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001814DR.VER ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001814DR.YEL ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001814DR ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. P0290005 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0290004 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0290003 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0290002 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. 00167000 SERIES OF ADJUSTABLE NOZZLES FOR LIQUID FERTILIZER. Fertiljet consists of a compact nylon body on which has been installed a series of adjustable and interchangeable stainless steel nozzles of different sizes. It is ideal for flat spraying and dispensing without a boom, with good coverage from 16 to 20 meters. Fertiljet has a 3-way feed and can be used for uniform or partial spraying, with independent control of the openings for the left and right outlets.
Cod. P0005568 The tandem valve allows controlling suction and delivery of the sprayer with one structure completely substituting the two single valves. The drive levers are on the same axle so as to simplify the manoeuvres for liquid control in the various passages and functions. Aluminium body treated with a cataphoresis cycle. Viton O-rings and Teflon-PTFE seals. Interchangeable Nylon flanges with different couplings and sizes. Possibility of constructing various models based on the sizes and the number of ways you intend to use.
Cod. VTSX8510 The tandem valve allows controlling suction and delivery of the sprayer with one structure completely substituting the two single valves. The drive levers are on the same axle so as to simplify the manoeuvres for liquid control in the various passages and functions. Aluminium body treated with a cataphoresis cycle. Viton O-rings and Teflon-PTFE seals. Interchangeable Nylon flanges with different couplings and sizes. Possibility of constructing various models based on the sizes and the number of ways you intend to use.
MANUAL TRANSFER PUMPCod. P0004072
VERTICAL MOTOR-DRIVE FOR BALL VALVECod. 68121899
MANUAL PISTON VALVE ASSEMBLYCod. P0290005
DOUBLE TANDEM VALVECod. P0005568
DOUBLE TANDEM VALVECod. VTSX8510