Cod. 00200106 PROPORTIONAL FLOW REGULATOR. Used in control units to regulate the flow during treatments with consumption proportional to the motor's RPM. It guarantees precise regulation and a linear flow rate. Also available in motorized versions.
Cod. 00200105 PROPORTIONAL FLOW REGULATOR. Used in control units to regulate the flow during treatments with consumption proportional to the motor's RPM. It guarantees precise regulation and a linear flow rate. Also available in motorized versions.
Cod. 00200007 PROPORTIONAL FLOW REGULATOR. Used in control units to regulate the flow during treatments with consumption proportional to the motor's RPM. It guarantees precise regulation and a linear flow rate. Also available in motorized versions.
Cod. P0004072 The pump allows the liquid chemical to be transferred from the manufacturer’s container to the sprayer in maximum safety. The pump is made entirely of polypropylene with Viton seals. It can transfer liquid from 20 litre cans up to 200 litre drums. It is fitted with three different adapters for sampling holes of from 46.5 mm up to 60 mm. The internal tube consists of four pieces that can be adjusted according to the height of the sample receptacle. The metering unit tap can be mounted directly on the pump or it can be left free with a flexible tube. The tap handle can be used in two different operating modes: the first with continuous flow opening, the second, with short pulses for fine metering. It is not necessary for the operator to pump continuously. Flow rate from 8 to 20 litres per minute depending on the viscosity of the liquid.
Cod. 10435099 The kit can be installed on any model of ball valves and allows the user to excite, manually moving the lever, the microswitch card measuring the position of the ball, so that to forward it to a remote visual electronic system, properly connected to the connectors given as an equipment. It can be used in any application where it is not possible to motorise the ball valve but is necessary to know its position at distance. The microswitch card can be powered at 12 Vcc. and 24 Vcc., 5A maximum. The microswitch card is located inside an aluminium structure, carefully protected.
Cod. 10433799 The kit can be installed on any model of ball valves and allows the user to excite, manually moving the lever, the microswitch card measuring the position of the ball, so that to forward it to a remote visual electronic system, properly connected to the connectors given as an equipment. It can be used in any application where it is not possible to motorise the ball valve but is necessary to know its position at distance. The microswitch card can be powered at 12 Vcc. and 24 Vcc., 5A maximum. The microswitch card is located inside an aluminium structure, carefully protected.
Cod. 10425399 The kit can be installed on any model of ball valves and allows the user to excite, manually moving the lever, the microswitch card measuring the position of the ball, so that to forward it to a remote visual electronic system, properly connected to the connectors given as an equipment. It can be used in any application where it is not possible to motorise the ball valve but is necessary to know its position at distance. The microswitch card can be powered at 12 Vcc. and 24 Vcc., 5A maximum. The microswitch card is located inside an aluminium structure, carefully protected.
MANUAL PRESSURE REGULATING VALVECod. 00200106
MANUAL TRANSFER PUMPCod. P0004072
KIT TO CONTROL THE POSITION OF MANUAL VALVESCod. 10435099
KIT TO CONTROL THE POSITION OF MANUAL VALVESCod. 10425399
