Search results for: 'WA 0852 2611 9277 Biaya Pemborong Interior Apartemen 2 Kamar Tidur Apartment Red Top Jakarta Pusat'

Cod. 6M41219V
This product is used to clean chemical products out of emptied containers before they are disposed of. It consists of a central shaft on which rotates a fluid-activated nozzle that is able to rotate through 360° to spray the inner surfaces of the container. The nozzle has tips at its end which allows it to break the protective film on sealed containers holding chemical products. It is made using anticorrosive material. Versions: with 1/2” BSP male connector and 18x1.5 male connector. The version with valve is featured by a fixed nozzle starting to deliver only when the container, overturned, is pressed downwards, allowing the operator to work under safe conditions.

Cod. 00200530.1
IXEF body, Viton OR and PTFE-Teflon gaskets, AISI 316 stainless steel ball. Nylon interchangeable flanges with various connections and sizes available. Maximum operating pressure 20bar – 290PSI with flowrate up to 600 lt/min. 8 seconds closing time, 0,2 Amp nominal absorption. The special setting of the section hole of the valve guarantees an exact and accurate control of flow. If applied along the lineat suction of a centrifugal pump, it allows a better steadiness of flow.

Cod. 00200500
"IXEF body, Viton OR and Teflon-PTFE gaskets, AISI 316 stainless steel ball with continuous flow system. Nylon interchangeable flanges with various connections and sizes available. Maximum operating pressure 20bar – 290PSI with flowrate up to 500 lt/min. 1,3 seconds closing time, 0,3 nominal absorption. Also available with lateral or lower inlet."

Cod. 00200501
"IXEF body, Viton OR and Teflon-PTFE gaskets, AISI 316 stainless steel ball with continuous flow system. Nylon interchangeable flanges with various connections and sizes available. Maximum operating pressure 20bar – 290PSI with flowrate up to 500 lt/min. 1,3 seconds closing time, 0,3 nominal absorption. Also available with lateral or lower inlet."

Cod. 00200701.ME
"Plastic body, Viton OR and Teflon-PTFE gaskets, plastic ball. Nylon interchangeable flanges with various connections and sizes available. Maximum operating pressure 20bar – 290PSI with flowrate beyond 1000 lt/min on the 2” ½ model. 3 seconds closing time, 0,6 Amp nominal absorption. Available in the ON/OFF and PROPORTIONAL versions with the opportunity of applying the angular sensor to detect the position of the ball."

Cod. 00200701
"Plastic body, Viton OR and Teflon-PTFE gaskets, plastic ball. Nylon interchangeable flanges with various connections and sizes available. Maximum operating pressure 20bar – 290PSI with flowrate beyond 1000 lt/min on the 2” ½ model. 3 seconds closing time, 0,6 Amp nominal absorption. Available in the ON/OFF and PROPORTIONAL versions with the opportunity of applying the angular sensor to detect the position of the ball."

Cod. VTD93510
"IXEF body. Viton OR. Teflon-PTFE gaskets. Delrin ball and nylon flanges with various connectors and different sizes. The specific shape of the ball and the internal Venturi, enable the valve to carry out suction and delivery functions at the same time. The system allows to always have a way in depression to use for suctioning liquids. In combination with a two ways valve, “dead man” model, carries out many functions under the maximum safety conditions."

Cod. P0003353
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.

Cod. P0004686
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.

Cod. P0004084.1
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.

Cod. P0004248
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.

Cod. P0005068
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.

Cod. P0004084
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.

Cod. P0004427
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.

Cod. P0004427.1
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.