Search results for: 'WA 0812 2782 5310 RAB Pemasangan Wall Moulding Di Tangga Di Tingkir Salatiga'

Cod. VTSC8500
The tandem valve allows controlling suction and delivery of the sprayer with one structure completely substituting the two single valves. The drive levers are on the same axle so as to simplify the manoeuvres for liquid control in the various passages and functions. Aluminium body treated with a cataphoresis cycle. Viton O-rings and Teflon-PTFE seals. Interchangeable Nylon flanges with different couplings and sizes. Possibility of constructing various models based on the sizes and the number of ways you intend to use.

Cod. VTDC7000
The recirculation valve allows creating a closed rinsing cycle for the entire system. The water is drawn from the supplementary tank and once the rinsing cycle has been completed, the liquid is sent for distribution in the boom. The system allows rinsing the spraying parts several times consuming a reduced amount of clean water without wasting the water contained in the supplementary tank. In addition, the rinsing liquid is not drained into the main tank, but distributed in the field through the boom. You also have the dual advantage of not having to dilute the treatment mixture in the main tank and not having to further agitate the contents with the risk of producing foam. Aluminium body treated with a cataphoresis cycle. Viton O-rings and Teflon-PTFE seals. Interchangeable Nylon flanges with different couplings and sizes. Possibility of constructing various models based on the sizes.

Cod. 63433599
1” ball valve complete with chemical dissolving nozzle. It is a 3-way valve with quick-coupling that can be attached on the outside of the mixer hopper to perform the following functions: 1) feed the Venturi system for mixer emptying; 2) feed the internal hopper nozzle to dissolve the chemicals; 3) feed the quick-funnel by means of the control taps.

Cod. 63432899
1”¼ ball valve complete with chemical dissolving nozzle. It is a 5-way valve with threaded flanges and/or quick-couplings that can be attached on the outside of the mixer hopper to perform the following functions: 1) feed the Venturi system for mixer emptying; 2) feed the internal hopper nozzle to dissolve the chemicals; 3) feed the quick-funnel by means of the control taps; 4) external feed for auxiliary functions. It can be coupled to the “G” pressure regulating safety valve.

Cod. 00200092
FLOW SWITCHING VALVE WITH GEARED REDUCTION MOTOR. Treated aluminium body with cataphoresis cycle. O.R. in Viton and Teflon-PTFE gasket. Interchangeable nylon flanges with different connections and in different sizes. Versions: ON/OFF closure used as a general valve and proportional closure as a pressure regulator. The ON/OFF version is available with a bottom and a side connection. Maximum flow with a flange of the same size as the valve: 350 lt./min.-92RPM. 12Vcc reduction motor.

Cod. 00200093
FLOW SWITCHING VALVE WITH GEARED REDUCTION MOTOR. Treated aluminium body with cataphoresis cycle. O.R. in Viton and Teflon-PTFE gasket. Interchangeable nylon flanges with different connections and in different sizes. Versions: ON/OFF closure used as a general valve and proportional closure as a pressure regulator. The ON/OFF version is available with a bottom and a side connection. Maximum flow with a flange of the same size as the valve: 350 lt./min.-92RPM. 12Vcc reduction motor.

Cod. 00200096
FLOW SWITCHING VALVE WITH GEARED REDUCTION MOTOR. Treated aluminium body with cataphoresis cycle. O.R. in Viton and Teflon-PTFE gasket. Interchangeable nylon flanges with different connections and in different sizes. Versions: ON/OFF closure used as a general valve and proportional closure as a pressure regulator. The ON/OFF version is available with a bottom and a side connection. Maximum flow with a flange of the same size as the valve: 350 lt./min.-92RPM. 12Vcc reduction motor.

Cod. 00200095
FLOW SWITCHING VALVE WITH GEARED REDUCTION MOTOR. Treated aluminium body with cataphoresis cycle. O.R. in Viton and Teflon-PTFE gasket. Interchangeable nylon flanges with different connections and in different sizes. Versions: ON/OFF closure used as a general valve and proportional closure as a pressure regulator. The ON/OFF version is available with a bottom and a side connection. Maximum flow with a flange of the same size as the valve: 350 lt./min.-92RPM. 12Vcc reduction motor.

Cod. 00200094
FLOW SWITCHING VALVE WITH GEARED REDUCTION MOTOR. Treated aluminium body with cataphoresis cycle. O.R. in Viton and Teflon-PTFE gasket. Interchangeable nylon flanges with different connections and in different sizes. Versions: ON/OFF closure used as a general valve and proportional closure as a pressure regulator. The ON/OFF version is available with a bottom and a side connection. Maximum flow with a flange of the same size as the valve: 350 lt./min.-92RPM. 12Vcc reduction motor.

Cod. 00200091
FLOW SWITCHING VALVE WITH GEARED REDUCTION MOTOR. Treated aluminium body with cataphoresis cycle. O.R. in Viton and Teflon-PTFE gasket. Interchangeable nylon flanges with different connections and in different sizes. Versions: ON/OFF closure used as a general valve and proportional closure as a pressure regulator. The ON/OFF version is available with a bottom and a side connection. Maximum flow with a flange of the same size as the valve: 350 lt./min.-92RPM. 12Vcc reduction motor.

Cod. 00200090
FLOW SWITCHING VALVE WITH GEARED REDUCTION MOTOR. Treated aluminium body with cataphoresis cycle. O.R. in Viton and Teflon-PTFE gasket. Interchangeable nylon flanges with different connections and in different sizes. Versions: ON/OFF closure used as a general valve and proportional closure as a pressure regulator. The ON/OFF version is available with a bottom and a side connection. Maximum flow with a flange of the same size as the valve: 350 lt./min.-92RPM. 12Vcc reduction motor.

Cod. P0004072
The pump allows the liquid chemical to be transferred from the manufacturer’s container to the sprayer in maximum safety. The pump is made entirely of polypropylene with Viton seals. It can transfer liquid from 20 litre cans up to 200 litre drums. It is fitted with three different adapters for sampling holes of from 46.5 mm up to 60 mm. The internal tube consists of four pieces that can be adjusted according to the height of the sample receptacle. The metering unit tap can be mounted directly on the pump or it can be left free with a flexible tube. The tap handle can be used in two different operating modes: the first with continuous flow opening, the second, with short pulses for fine metering. It is not necessary for the operator to pump continuously. Flow rate from 8 to 20 litres per minute depending on the viscosity of the liquid.

Cod. T0370365.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370355.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370345.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.