Search results for: 'WA 0859 3970 0884 Spesialis Green House Sayuran WIlayah Kemalang Klaten'

Cod. 003790G3
TURBINE FLOWMETER WITH AUTOMATIC PROGRAMMABLE STOP Available in the sizes 1”½ (35-350 l/min) and 2” (75-750 l/min). Maximum pressure 3 bar. Allows programming the amount of liquid transfer; when reaching the set value, the passage manually opened with a lever automatically closes warning the operator with an acoustic signal. It comes in a Compact (1) and a Remote (2) version and can control other external devices (max. 5 A) such as a solenoid valve. The Parallel version can be fitted with a level sensor to be ordered separately.

Cod. 003790G2
TURBINE FLOWMETER WITH AUTOMATIC PROGRAMMABLE STOP Available in the sizes 1”½ (35-350 l/min) and 2” (75-750 l/min). Maximum pressure 3 bar. Allows programming the amount of liquid transfer; when reaching the set value, the passage manually opened with a lever automatically closes warning the operator with an acoustic signal. It comes in a Compact (1) and a Remote (2) version and can control other external devices (max. 5 A) such as a solenoid valve. The Parallel version can be fitted with a level sensor to be ordered separately.

Cod. 00379010
TURBINE FLOWMETER WITH AUTOMATIC PROGRAMMABLE STOP Available in the sizes 1”½ (35-350 l/min) and 2” (75-750 l/min). Maximum pressure 3 bar. Allows programming the amount of liquid transfer; when reaching the set value, the passage manually opened with a lever automatically closes warning the operator with an acoustic signal. It comes in a Compact (1) and a Remote (2) version and can control other external devices (max. 5 A) such as a solenoid valve. The Parallel version can be fitted with a level sensor to be ordered separately.

Cod. 00379007
TURBINE FLOWMETER WITH AUTOMATIC PROGRAMMABLE STOP Available in the sizes 1”½ (35-350 l/min) and 2” (75-750 l/min). Maximum pressure 3 bar. Allows programming the amount of liquid transfer; when reaching the set value, the passage manually opened with a lever automatically closes warning the operator with an acoustic signal. It comes in a Compact (1) and a Remote (2) version and can control other external devices (max. 5 A) such as a solenoid valve. The Parallel version can be fitted with a level sensor to be ordered separately.

Cod. PHY00152
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. PHY05133
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. P0005133
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. P1000152
Centrifugal pump with electric 12V DC drive or electro-hydraulic drive. Completely made of plastic material, it is used on sprayers to rinse containers of chemical products and the mixer. Connected to clean water tank it is able to feed the washing accessories with maximum flow rate 35 l/min and with maximum operating pressure 2,8 bar. Available with 1” BSP male thread connectors or with T3 male fork connectors.

Cod. 68121999
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. 24 Vcc. Motorizations against demand.

Cod. 68121899
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. 24 Vcc. Motorizations against demand.

Cod. 68155399
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. For the horizontally motorized version a disengagement kit is available (to be ordered separately) to manually drive the valve if necessary. 24 Vcc. Motorizations against demand.

Cod. 6815529A
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. For the horizontally motorized version a disengagement kit is available (to be ordered separately) to manually drive the valve if necessary. 24 Vcc. Motorizations against demand.

Cod. 001826DR.YEL
ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.

Cod. 001826DR
ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.

Cod. 001814DR.YEL
ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.