Cod. 44301699 Connectable to all axial turbine Rapid Check flowmeters. It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.
Cod. 68121999 ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. 24 Vcc. Motorizations against demand.
Cod. 68121899 ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. 24 Vcc. Motorizations against demand.
Cod. 6815529A ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. For the horizontally motorized version a disengagement kit is available (to be ordered separately) to manually drive the valve if necessary. 24 Vcc. Motorizations against demand.
Cod. 001826DR.VER ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001826DR.YEL ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001826DR ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001814DR.VER ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001814DR.YEL ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. 001814DR ACCESSORY FOR MIXING CHEMICAL PRODUCTS AND WASHING CONTAINERS. Capacity 20 liters. It can be used for mixing: liquid, powdered, and granular chemical products as well as chemical products contained in water-soluble bags. The accessory features a Duplex rotatory nozzle. The following are standard features on all the models: a quick funnel, a nozzle for dissolving products, an external support frame, and an internal inspection port.
Cod. P0290005 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0290004 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0290003 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. P0290002 Used to feed various spraying devices (mixers, container washers, tank washers, washing guns, etc.). Made of an anticorrosive material. Maximum operating pressure 20 bar. Sheet metal support flanges. Two versions: head and piston to satisfy every application requirement. The piston version allows “On/Off” and “deadman’s” opening for safety. ½” – ¾” – 1” BSP male threaded inlet and fork quick-coupling. ½” – ½” through-wall – 1” BSP male threaded tap outlet and fork quick-coupling. Available with 2 or more ways. At the time of order specify the dimensions of the inlet and outlet connectors.
Cod. 00167000 SERIES OF ADJUSTABLE NOZZLES FOR LIQUID FERTILIZER. Fertiljet consists of a compact nylon body on which has been installed a series of adjustable and interchangeable stainless steel nozzles of different sizes. It is ideal for flat spraying and dispensing without a boom, with good coverage from 16 to 20 meters. Fertiljet has a 3-way feed and can be used for uniform or partial spraying, with independent control of the openings for the left and right outlets.
RAPID CHECK UNIT - IXEF BODYCod. 44301699
VERTICAL MOTOR-DRIVE FOR BALL VALVECod. 68121999
HORIZONTAL MOTOR-DRIVE FOR BALL VALVECod. 6815529A
MIXER STANDARDCod. 001826DR.VER
MANUAL PISTON VALVE ASSEMBLYCod. P0290005