Search results for: 'WA 0852 2611 9277 Ongkos Pembuatan Interior Rumah Hook 1 Lantai Daerah Jatinegara Jakarta Timur'

Cod. 00370115
STAINLESS STEEL (304-316) AXIAL-FLOW TURBINE FLOWMETER. Stainless steel body (304-316) in the versions with antacid plastic ducts (PVDF) or stainless steel ducts. This is the most suitable flowmeter for measuring corrosive and abrasive liquid chemical products at high working pressures. It can be used with a sinusoidal-wave or square-wave sensor, 4-20 mA.

Cod. 68110499
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110399
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110299
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. P0005810-1
"3,5” digital color touchscreen display. Photo sensor to regulate back lighting. French, English, Italian and German multilingual menu. USB port for data collection. Energy-saving with turning off after some minutes of inactivity. Choice of the number of decimals after comma. ISOBUS Protocol. Rear coupling system with provision of suction cup attachment. It has two signals inputs for measuring the flow, speed and filling level. 12Vcc power supply. Connected to a flowmeter the display indicates cumulative volume delivered (resettable) up to 999.999 units and partial volume in different units of measure: litres, Usa gallons, mc/h. Setting of pulses for calibration of liquids under several temperatures and viscosities. Setting of pulses for flowmeters from ½” to 4”. Can be connected to square wave sensors. RAM-MOUNT suction cup compatible."

Cod. 6815529A
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. For the horizontally motorized version a disengagement kit is available (to be ordered separately) to manually drive the valve if necessary. 24 Vcc. Motorizations against demand.

Cod. P0005810.4
"3,5” digital color touchscreen display. Photo sensor to regulate back lighting. French, English, Italian and German multilingual menu. USB port for data collection. Energy-saving with turning off after some minutes of inactivity. Choice of the number of decimals after comma. ISOBUS Protocol. Rear coupling system with provision of suction cup attachment. 12Vcc power supply. Connected to a flowmeter, the display indicates real time lit/min flowrate and total flowrate. Setting of desired quantities also available to obtain an outlet signal once the required value is reached. The outlet signal (2,6A) can produce luminous or audio pulses, can drive a 12Vcc gear motor or an electrovalve or an engine. Also compatible with RAM-MOUNT suction cup."

Cod. 00200115
AUTOMATIC SPRING-LOADED MAXIMUM PRESSURE SAFETY VALVES. These valves are made of a plastic (nylon and fiberglass) which is particularly resistant to liquid chemical products and even abrasive liquid chemical products. If they are used as safety valves, they guarantee a constant pressure whenever it is not necessary to continuously regulate the working pressure. Any excess liquid bypasses the valve and allows it to maintain a constant line pressure. Available in the membrane version (for better regulating accuracy) and the piston version (to deaden the effect of vibrations).

Cod. 00200114
AUTOMATIC SPRING-LOADED MAXIMUM PRESSURE SAFETY VALVES. These valves are made of a plastic (nylon and fiberglass) which is particularly resistant to liquid chemical products and even abrasive liquid chemical products. If they are used as safety valves, they guarantee a constant pressure whenever it is not necessary to continuously regulate the working pressure. Any excess liquid bypasses the valve and allows it to maintain a constant line pressure. Available in the membrane version (for better regulating accuracy) and the piston version (to deaden the effect of vibrations).

Cod. 00200082
AUTOMATIC SPRING-LOADED MAXIMUM PRESSURE SAFETY VALVES. These valves are made of a plastic (nylon and fiberglass) which is particularly resistant to liquid chemical products and even abrasive liquid chemical products. If they are used as safety valves, they guarantee a constant pressure whenever it is not necessary to continuously regulate the working pressure. Any excess liquid bypasses the valve and allows it to maintain a constant line pressure. Available in the membrane version (for better regulating accuracy) and the piston version (to deaden the effect of vibrations).

Cod. 00200081
AUTOMATIC SPRING-LOADED MAXIMUM PRESSURE SAFETY VALVES. These valves are made of a plastic (nylon and fiberglass) which is particularly resistant to liquid chemical products and even abrasive liquid chemical products. If they are used as safety valves, they guarantee a constant pressure whenever it is not necessary to continuously regulate the working pressure. Any excess liquid bypasses the valve and allows it to maintain a constant line pressure. Available in the membrane version (for better regulating accuracy) and the piston version (to deaden the effect of vibrations).

Cod. 001869RR.VER
Capacity 29 litres. Used for mixing: liquid, powder and granular chemicals as well as chemicals contained in water-soluble bags. The accessory features an Energet rotatory nozzle. Standard features on all the models are: quick funnel, nozzle for dissolving products, external support frame, external inspection pot, water glass with graduated scale and aspiration kit for the external aspiration of chemical products. Its symmetrical structure makes it easy to install on any type of sprayer. Fitted with a gun and tube kit.
A double cover protects the service accessories useable only during the mixing phase.
It is available in a range of different colors.

Cod. 001869RR.YEL
Capacity 29 litres. Used for mixing: liquid, powder and granular chemicals as well as chemicals contained in water-soluble bags. The accessory features an Energet rotatory nozzle. Standard features on all the models are: quick funnel, nozzle for dissolving products, external support frame, external inspection pot, water glass with graduated scale and aspiration kit for the external aspiration of chemical products. Its symmetrical structure makes it easy to install on any type of sprayer. Fitted with a gun and tube kit.
A double cover protects the service accessories useable only during the mixing phase.
It is available in a range of different colors.

Cod. 001869RR
Capacity 29 litres. Used for mixing: liquid, powder and granular chemicals as well as chemicals contained in water-soluble bags. The accessory features an Energet rotatory nozzle. Standard features on all the models are: quick funnel, nozzle for dissolving products, external support frame, external inspection pot, water glass with graduated scale and aspiration kit for the external aspiration of chemical products. Its symmetrical structure makes it easy to install on any type of sprayer. Fitted with a gun and tube kit.
A double cover protects the service accessories useable only during the mixing phase.
It is available in a range of different colors.

Cod. 001869DR.VER
Capacity 29 litres. Used for mixing: liquid, powder and granular chemicals as well as chemicals contained in water-soluble bags. The accessory features an Energet rotatory nozzle. Standard features on all the models are: quick funnel, nozzle for dissolving products, external support frame, external inspection pot, water glass with graduated scale and aspiration kit for the external aspiration of chemical products. Its symmetrical structure makes it easy to install on any type of sprayer. Fitted with a gun and tube kit.
A double cover protects the service accessories useable only during the mixing phase.
It is available in a range of different colors.