Search results for: 'WA 0852 2611 9277 Biaya Jasa Renovasi Interior Set Kamar Tidur Apartemen B-Residence Bogor'

Cod. 00200322
The set of manual taps has been designed and constructed with specific materials able to resist aggressive chemicals and corrosion. Available in three body versions with hose-tail and threaded couplings. The head or piston closures allow satisfying any application requirement. The taps in the piston version offer “On/Off” and “deadman’s” opening.

Cod. 00200321
The set of manual taps has been designed and constructed with specific materials able to resist aggressive chemicals and corrosion. Available in three body versions with hose-tail and threaded couplings. The head or piston closures allow satisfying any application requirement. The taps in the piston version offer “On/Off” and “deadman’s” opening.

Cod. 00200320
The set of manual taps has been designed and constructed with specific materials able to resist aggressive chemicals and corrosion. Available in three body versions with hose-tail and threaded couplings. The head or piston closures allow satisfying any application requirement. The taps in the piston version offer “On/Off” and “deadman’s” opening.

Cod. 01331799
Anti-overflow level sensor fitted on the tank, which allows automatic closure of the instrument when the liquid reaches the maximum level. When the tank is full, the flow is cut off even if the set value has not been reached. The system allows completely filling the tanks in full safety preventing the liquid from overflowing. It can be coupled to the Pro-Flow Parallel turbine versions.

Cod. P0005753
Pro-Flow with turbine flowmeter and programmable automatic stopping allows programming the desired amount of liquid transfer. Once the set amount is reached, the system automatically stops the flow. Supplied with a 2” threaded male coupling. 9V battery power supply included or with a 12VDC external power supply. Digital display, USB port to export the operating data, NO/NC contact output and input signal for connection to the filling level sensor. Flow rate up to 500 litres/minute (132 GPM) and maximum operating pressure of 12 bar (174 psi).

Cod. CH370000
INSTRUMENT FOR MEASURING AND READING REVOLUTIONS PER MINUTE. The 12 VDC powered, backlit Pony RPM in real-time measures the RPM of any rotary shaft fitted with a toothed measuring disk connected to the display. It is equipped with a device for remote control of an actuator or electric motor to increase or decrease the RPM. The operator can set the minimum and maximum value via the keypad together with the “0” value. Suitable for use with weeding booms with air sleeve.

Cod. T0370365.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370355.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370345.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370335.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370325.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. T0370320.A

STAINLESS STEEL AXIAL TURBINE FLOW METER.
AISI 316 stainless steel body, conveyors made of acid-resistant plastic material (PVDF), propeller with PTFE coating, ceramic supports, AISI 316 seeger rings.
Comestible liquids as follow are indicated in the measurement: water, oil, milk, wine, beer and vinegar; for this reason a declaration of conformity for contact with foodstuffs is provided, in accordance with the existing standards.
Resistant to high work pressures; can be combined with sine wave, square wave or Hall effect sensors.

Cod. 00185600
TECHNICAL FEATURES · Filling and transferring of liquids. · Mixing of chemical products. · Internal washing of empty containers for chemical products. · Independent washing of the systems composing the unit. · Washing of the Sprayer. · Collection of the residues remaining in the Sprayer. TECHNICAL STRUCTURE · Polyethylene tanks with various capacities, fitted with cover equipped with quick funnel with rotating nozzles, wide angles flat nozzles for dissolving chemical products, vortex system for mixing and suction system for quick emptying. · 500 liters/minute Centrifugal Pump. · 5,5 Kw Explosion Engine (Honda or Lombardini) to activate the Centrifugal Pump. · Cataphoresis treated steel frame, complete with wheels for movements. · Some models are equipped with an auxiliary tank to contain clean water, and with a 3·points connection for the coupling to the tractor lifter. · Tandem Ball Valve to control all the operative phases: A1 connected to suction. B1 connected to delivery.

Cod. 001859EL
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.

Cod. 00185900
MAIN OPERATIVE PHASES - The Tandem Ball Valve allows to have the operating levers on the same axis, thus making easier the series of operations to control the liquid through the different passages. 1) Filling of the Sprayer suctioning water from the outside (channel, well and so on). 2) During the Sprayer filling it is possible to introduce the mixed chemical products. 3) Mixing of the chemical products in a closed circuit/recycle. 4) Washing of containers for chemical products and washing of the structure. 5) Washing of the Sprayer and collection of the rinsing residues. 6) Quick transfer of the liquids.