Search results for: 'WA 0812 2782 5310 Jasa Pemborong Rumah Kayu Bungalow Di Lendah Kulon Progo'

Cod. 63560199
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. P0005810-1
"3,5” digital color touchscreen display. Photo sensor to regulate back lighting. French, English, Italian and German multilingual menu. USB port for data collection. Energy-saving with turning off after some minutes of inactivity. Choice of the number of decimals after comma. ISOBUS Protocol. Rear coupling system with provision of suction cup attachment. It has two signals inputs for measuring the flow, speed and filling level. 12Vcc power supply. Connected to a flowmeter the display indicates cumulative volume delivered (resettable) up to 999.999 units and partial volume in different units of measure: litres, Usa gallons, mc/h. Setting of pulses for calibration of liquids under several temperatures and viscosities. Setting of pulses for flowmeters from ½” to 4”. Can be connected to square wave sensors. RAM-MOUNT suction cup compatible."

Cod. 63408399.UNI
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.

Cod. P1000153
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.

Cod. P1000164
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.

Cod. P1000154
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.

Cod. P1000163
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.

Cod. 63408399
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.

Cod. 6355059R
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.

Cod. 6340839R
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.

Cod. 63550599
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.

Cod. VTD93510
"IXEF body. Viton OR. Teflon-PTFE gaskets. Delrin ball and nylon flanges with various connectors and different sizes. The specific shape of the ball and the internal Venturi, enable the valve to carry out suction and delivery functions at the same time. The system allows to always have a way in depression to use for suctioning liquids. In combination with a two ways valve, “dead man” model, carries out many functions under the maximum safety conditions."

Cod. P0003333.2
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.

Cod. P0003353
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.

Cod. P0003353.1
Made of materials resistant to aggressive chemicals. O-rings in Viton and internal parts in stainless steel. They allow the liquid to flow in one direction and the spring closure allows perfect seal to prevent the liquid from flowing out in the opposite direction. Available with different couplings to satisfy every application requirement. They can be coupled directly to our ball valves with the body in aluminium. Side coupling for possible fitting of a tap (supplied separately) for liquid suction from an external container.