Search results for: 'WA 0852 2611 9277 Biaya Pembuatan Backdrop TV Classic Apartment The Oasis Mahogany Cikarang Bekasi'

Cod. 00M00016
AUTOMATIC SPRING-LOADED MAXIMUM PRESSURE SAFETY VALVES. These valves are made of a plastic (nylon and fiberglass) which is particularly resistant to liquid chemical products and even abrasive liquid chemical products. If they are used as safety valves, they guarantee a constant pressure whenever it is not necessary to continuously regulate the working pressure. Any excess liquid bypasses the valve and allows it to maintain a constant line pressure. Available in the membrane version (for better regulating accuracy) and the piston version (to deaden the effect of vibrations).

Cod. 00M00072
AUTOMATIC SPRING-LOADED MAXIMUM PRESSURE SAFETY VALVES. These valves are made of a plastic (nylon and fiberglass) which is particularly resistant to liquid chemical products and even abrasive liquid chemical products. If they are used as safety valves, they guarantee a constant pressure whenever it is not necessary to continuously regulate the working pressure. Any excess liquid bypasses the valve and allows it to maintain a constant line pressure. Available in the membrane version (for better regulating accuracy) and the piston version (to deaden the effect of vibrations).

Cod. 00M0007Y
AUTOMATIC SPRING-LOADED MAXIMUM PRESSURE SAFETY VALVES. These valves are made of a plastic (nylon and fiberglass) which is particularly resistant to liquid chemical products and even abrasive liquid chemical products. If they are used as safety valves, they guarantee a constant pressure whenever it is not necessary to continuously regulate the working pressure. Any excess liquid bypasses the valve and allows it to maintain a constant line pressure. Available in the membrane version (for better regulating accuracy) and the piston version (to deaden the effect of vibrations).

Cod. 00M0007G
AUTOMATIC SPRING-LOADED MAXIMUM PRESSURE SAFETY VALVES. These valves are made of a plastic (nylon and fiberglass) which is particularly resistant to liquid chemical products and even abrasive liquid chemical products. If they are used as safety valves, they guarantee a constant pressure whenever it is not necessary to continuously regulate the working pressure. Any excess liquid bypasses the valve and allows it to maintain a constant line pressure. Available in the membrane version (for better regulating accuracy) and the piston version (to deaden the effect of vibrations).

Cod. 00379011
Available in the sizes 1”½ (20-400 l/min) and 2” (45-900 l/min). Maximum pressure 8 bar. Because there are no internal moving parts, it is particularly suitable for measuring aggressive liquids or with small suspended solid particles. Compared to the Pro-Flow version with turbine flowmeter, this model does not offer the acoustic signal, external 5A device control and level sensor connection functions.

Cod. 00379012
Available in the sizes 1”½ (20-400 l/min) and 2” (45-900 l/min). Maximum pressure 8 bar. Because there are no internal moving parts, it is particularly suitable for measuring aggressive liquids or with small suspended solid particles. Compared to the Pro-Flow version with turbine flowmeter, this model does not offer the acoustic signal, external 5A device control and level sensor connection functions.

Cod. 63461899
The system is made of plastic and stainless steel. It is suitable for fitting inside specially shaped hoppers to build mixers. It is composed of a Venturi system which allows direct suction of the product contained in the hopper. In the version with external suction it can also be used to empty containers of liquid products without having to transfer them. Available in versions with (ASP) and without (JET) external suction.

Cod. 63422099
The system is made of plastic and stainless steel. It is suitable for fitting inside specially shaped hoppers to build mixers. It is composed of a Venturi system which allows direct suction of the product contained in the hopper. In the version with external suction it can also be used to empty containers of liquid products without having to transfer them. Available in versions with (ASP) and without (JET) external suction.

Cod. 20130199
ELECTRICAL INTAKE SYSTEM. The peristaltic pumps are used to metre and transfer a liquid chemical product in units. The control system can operate on up a maximum of 4 peristaltic pumps for metering 4 liquid chemical products. The peristaltic pumps send the metered product to the piston pump which injects the chemical product into the pressure line. Two models: P100 and P150. Peristaltic pump P100 takes hoses of Ø3.2mm, Ø6.4mm and Ø9.6mm; peristaltic pump P150 takes hoses of Ø12mm and Ø17mm. These are activated by a a multiphase reduction motor with variable Rpm.

Cod. 20120599
ELECTRICAL INTAKE SYSTEM. The peristaltic pumps are used to metre and transfer a liquid chemical product in units. The control system can operate on up a maximum of 4 peristaltic pumps for metering 4 liquid chemical products. The peristaltic pumps send the metered product to the piston pump which injects the chemical product into the pressure line. Two models: P100 and P150. Peristaltic pump P100 takes hoses of Ø3.2mm, Ø6.4mm and Ø9.6mm; peristaltic pump P150 takes hoses of Ø12mm and Ø17mm. These are activated by a a multiphase reduction motor with variable Rpm.

Cod. 63520599
ASPIRATION GUN KIT WITH TUBE AND BALL VALVE KIT WITH TUBE. These accessories can be coupled to mixers with the eddy unit mounted inside the hopper. They are particularly suitable for dust suction, which is sucked from the container and transferred directly to the mixer drain without passing through the mixing hopper. They can also be used for liquid suction. Operation is determined by the internal eddy feed pressure of at least 4-5 bar.

Cod. P0004918
Polmac presents the Cup Key to put up and remove spraying nozzles on the booms spraying pesticides. The nozzle is currently fit and removed from the nozzle-holder by hand with big difficulty. Without the use of any protective device, injuries to fingers and the certain contact with chemical products are to be risked, while the help of gloves doesn’t assure any handiness, due to the small size of the nozzle and the narrow space of the structure (spraying boom) on which they are mounted. For fitting on the nozzle-holder, the nozzle with bayonet connection has to be inserted into the Cup Key and a 45° circular move has to be effected up to the locking of the nozzle. The removal procedure is carried out following the reversed operation. At the end of these operations the Cup Key has to be removed to be used afterwards.

Cod. P0004911
Polmac presents the Cup Key to put up and remove spraying nozzles on the booms spraying pesticides. The nozzle is currently fit and removed from the nozzle-holder by hand with big difficulty. Without the use of any protective device, injuries to fingers and the certain contact with chemical products are to be risked, while the help of gloves doesn’t assure any handiness, due to the small size of the nozzle and the narrow space of the structure (spraying boom) on which they are mounted. For fitting on the nozzle-holder, the nozzle with bayonet connection has to be inserted into the Cup Key and a 45° circular move has to be effected up to the locking of the nozzle. The removal procedure is carried out following the reversed operation. At the end of these operations the Cup Key has to be removed to be used afterwards.

Cod. P0004974
Polmac presents the Cup Key to put up and remove spraying nozzles on the booms spraying pesticides. The nozzle is currently fit and removed from the nozzle-holder by hand with big difficulty. Without the use of any protective device, injuries to fingers and the certain contact with chemical products are to be risked, while the help of gloves doesn’t assure any handiness, due to the small size of the nozzle and the narrow space of the structure (spraying boom) on which they are mounted. For fitting on the nozzle-holder, the nozzle with bayonet connection has to be inserted into the Cup Key and a 45° circular move has to be effected up to the locking of the nozzle. The removal procedure is carried out following the reversed operation. At the end of these operations the Cup Key has to be removed to be used afterwards.

Cod. 001869RR.VER
Capacity 29 litres. Used for mixing: liquid, powder and granular chemicals as well as chemicals contained in water-soluble bags. The accessory features an Energet rotatory nozzle. Standard features on all the models are: quick funnel, nozzle for dissolving products, external support frame, external inspection pot, water glass with graduated scale and aspiration kit for the external aspiration of chemical products. Its symmetrical structure makes it easy to install on any type of sprayer. Fitted with a gun and tube kit.
A double cover protects the service accessories useable only during the mixing phase.
It is available in a range of different colors.