Search results for: 'WA 0812 2782 5310 Pembuat Plafon Akustik Knauf Gedangsari Gunungkidul'

Cod. 68112199
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110499
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110399
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110299
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68121799
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68121999
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. 24 Vcc. Motorizations against demand.

Cod. 68121899
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. 24 Vcc. Motorizations against demand.

Cod. 68155399
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. For the horizontally motorized version a disengagement kit is available (to be ordered separately) to manually drive the valve if necessary. 24 Vcc. Motorizations against demand.

Cod. 6815529A
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. For the horizontally motorized version a disengagement kit is available (to be ordered separately) to manually drive the valve if necessary. 24 Vcc. Motorizations against demand.

Cod. P0005568
The tandem valve allows controlling suction and delivery of the sprayer with one structure completely substituting the two single valves. The drive levers are on the same axle so as to simplify the manoeuvres for liquid control in the various passages and functions. Aluminium body treated with a cataphoresis cycle. Viton O-rings and Teflon-PTFE seals. Interchangeable Nylon flanges with different couplings and sizes. Possibility of constructing various models based on the sizes and the number of ways you intend to use.

Cod. 6815549A
The tandem valve allows controlling suction and delivery of the sprayer with one structure completely substituting the two single valves. The drive levers are on the same axle so as to simplify the manoeuvres for liquid control in the various passages and functions. Aluminium body treated with a cataphoresis cycle. Viton O-rings and Teflon-PTFE seals. Interchangeable Nylon flanges with different couplings and sizes. Possibility of constructing various models based on the sizes and the number of ways you intend to use.

Cod. P0005747
The tandem valve allows controlling suction and delivery of the sprayer with one structure completely substituting the two single valves. The drive levers are on the same axle so as to simplify the manoeuvres for liquid control in the various passages and functions. Aluminium body treated with a cataphoresis cycle. Viton O-rings and Teflon-PTFE seals. Interchangeable Nylon flanges with different couplings and sizes. Possibility of constructing various models based on the sizes and the number of ways you intend to use.