Search results for: 'WA 0859 3970 0884 Jasa Bikin Gerobak Motor Bakso Berpengalaman Magelang Utara Magelang'

Cod. 68121999
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. 24 Vcc. Motorizations against demand.

Cod. 68121899
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. 24 Vcc. Motorizations against demand.

Cod. 68155399
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. For the horizontally motorized version a disengagement kit is available (to be ordered separately) to manually drive the valve if necessary. 24 Vcc. Motorizations against demand.

Cod. 6815529A
ELECTRIC CONTROL KIT FOR BALL VALVE. The Control Kit makes it possible to select ball valves outlets remotely and automatically without direct manual intervention on the plant. Polmac produces 12 volt direct current electrical drives for ball valves of various dimensions and characteristics (3-6 way for 1’’ ¼ to 2’’ ½ valves) with 2 different set-ups for a wide range of requirements and characteristics for the plant to be driven: vertical motor-drive with epicyclical reduction gear, horizontal motor-drive with worm-screw reduction gear. For the horizontally motorized version a disengagement kit is available (to be ordered separately) to manually drive the valve if necessary. 24 Vcc. Motorizations against demand.

Cod. 68112199
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110499
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110399
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68110299
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. 68121799
The electrohydraulic motor drive system applicable to all the 5-way (4 outlets) and 6-way (5 outlets) ball valves allows reaching any position using a hydraulic feed with a minimum pressure of 40 bar. The solenoid valve integrated in the system is connected to a 12VDC control which displays the ball position. There are three types of sensor to determine the position: microswitches, reed sensors and sensors for the radio frequency control.

Cod. VTSC1000.P
FLOW SWITCHING VALVE WITH MANUAL CONTROL. Aluminium body with cataphoresis treatment. O-rings made of Viton, gaskets made of Teflon-PTFE. Nylon flanges in different sizes and with various connectors. IMPORTANT: to order ball valves that can be motorized, please replace the last number of the code with ‘M’. Example: code VTD90100 should be changed to VTD9010M.

Cod. VTSC0900.P
FLOW SWITCHING VALVE WITH MANUAL CONTROL. Aluminium body with cataphoresis treatment. O-rings made of Viton, gaskets made of Teflon-PTFE. Nylon flanges in different sizes and with various connectors. IMPORTANT: to order ball valves that can be motorized, please replace the last number of the code with ‘M’. Example: code VTD90100 should be changed to VTD9010M.

Cod. VTSC0800.P
FLOW SWITCHING VALVE WITH MANUAL CONTROL. Aluminium body with cataphoresis treatment. O-rings made of Viton, gaskets made of Teflon-PTFE. Nylon flanges in different sizes and with various connectors. IMPORTANT: to order ball valves that can be motorized, please replace the last number of the code with ‘M’. Example: code VTD90100 should be changed to VTD9010M.

Cod. VTDC0800.P
FLOW SWITCHING VALVE WITH MANUAL CONTROL. Aluminium body with cataphoresis treatment. O-rings made of Viton, gaskets made of Teflon-PTFE. Nylon flanges in different sizes and with various connectors. IMPORTANT: to order ball valves that can be motorized, please replace the last number of the code with ‘M’. Example: code VTD90100 should be changed to VTD9010M.

Cod. VTSC0300.P
FLOW SWITCHING VALVE WITH MANUAL CONTROL. Aluminium body with cataphoresis treatment. O-rings made of Viton, gaskets made of Teflon-PTFE. Nylon flanges in different sizes and with various connectors. IMPORTANT: to order ball valves that can be motorized, please replace the last number of the code with ‘M’. Example: code VTD90100 should be changed to VTD9010M.

Cod. VTDC0300.P
FLOW SWITCHING VALVE WITH MANUAL CONTROL. Aluminium body with cataphoresis treatment. O-rings made of Viton, gaskets made of Teflon-PTFE. Nylon flanges in different sizes and with various connectors. IMPORTANT: to order ball valves that can be motorized, please replace the last number of the code with ‘M’. Example: code VTD90100 should be changed to VTD9010M.