Search results for: 'WA 0859 3970 0884 Pusat Atap Canopy Geser Manual Temon Kulon Progo'

Cod. P0004072
The pump allows the liquid chemical to be transferred from the manufacturer’s container to the sprayer in maximum safety. The pump is made entirely of polypropylene with Viton seals. It can transfer liquid from 20 litre cans up to 200 litre drums. It is fitted with three different adapters for sampling holes of from 46.5 mm up to 60 mm. The internal tube consists of four pieces that can be adjusted according to the height of the sample receptacle. The metering unit tap can be mounted directly on the pump or it can be left free with a flexible tube. The tap handle can be used in two different operating modes: the first with continuous flow opening, the second, with short pulses for fine metering. It is not necessary for the operator to pump continuously. Flow rate from 8 to 20 litres per minute depending on the viscosity of the liquid.

Cod. 635614CP
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 635602CP
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 6356149P
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 63561499
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 63560999
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 63560699
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 63560599
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 6356039P
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 63560399
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 6356029P
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 63560299
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 6356019P
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 63560199
New range of rotating spray nozzles made of non-corroding material, used to clean the inside of the tanks. Available in three versions, A-B-C, to meet varying rinsing needs and to adapt to different size and shape tanks. The fluid-activated rotating heads perform a total 360° cleaning cycle. In all models the heads rotate on the horizontal axis and model C is also equipped with a vertically rotating head. Wide range of interchangeable nozzle shapes with bayonet connections for different water consumption requirements and head rotation speeds. Supplied with Ø15 hosetail feed connector or, on request Ø10 or Ø13, the versions for the extension pipe with ¾” male thread. All models can be supplied with a 30cm and 50cm extension pipe.

Cod. 63408399.UNI
These are used to clean the internal walls of the tanks and the chemical product mixers. The fluid-activated rotating heads perform a total 360° cleaning cycle. Made of non-corroding material. Connections: top male ½” BSP with hosetail and side female 3/8” BSP. Models with interchangeable nozzles allow the consumption and rotation speed to be varied. The nozzle directions can be adjusted. Tap models make it easy to fit and use a hydraulic power supply, when necessary, without the need for additional valves. Supplied with 13 mm connection, Ø10mm connectors available on request.